Snow Cone Machine
Customer is responsible for getting ice. 1/2 lb. of ice will make approximately 20 servings. Easier to buy crushed ice. MACHINE DESCRIPTION The Sno-King is an automatic shaver with a tremendous capacity. You will find that it keeps up with any demand. The Sno-King consists of the hopper, which houses the cutter head, the pusher handle, the motor, and the display case. ELECTRICAL REQUIREMENTS The Sno-King operates on 120 Volt, 15 Amp, single phase, 60 cycle AC current. Be sure that your electrical supply meets this requirement. ICE REQUIREMENTS The Sno-King can take ice cubes or block ice, if you break the block into pieces approximately 3 to 4 inches in size. NOTE: The ice will not enter the shaving chute if the pieces are too large. MACHINE OPERATION Plug the power cord into the appropriate electrical outlet. TO OPERATE THE SNO-KING 1. Fill the hopper to within an inch of the top with ice cubes or block ice (no larger than 3" to 4"). The larger the pieces, the better the snow. 2. Toggle the POWER switch to the ON position. 3. While pushing the MOTOR switch, apply downward pressure to the pusher handle. Apply firm and even pressure to make the best snow. Practice will allow you to gauge when to stop pressing. This allows the ice to resettle against the shaver head. Too much pressure will result in snow that is coarse; too little pressure will make the snow mushy. NOTE: Never allow any foreign or metallic objects around the shaft. Overall Dimensions: Width: 26" Depth:14" Height: 29" |